ZNB-XY1 nourishment infusion pump, a high-tech product developed and made in our company. It features greater convenience and versatility. It can deliver gastrointestinal nourishment and common intravenous fluids in hospital ward and family. It can also be used in scientific research and liquids infusion requires high accuracy.

Features1. After set the flow rate and required volume, start the pump and the pump will keep running until the required volume has been infused.

2. Alarm after infusion finish: When required volume has been infused, the alarm will timely warn the medical workers to handle.

3. Apply to diverse liquids: Water, intravenous fluids and medicine can be delivered.

4. Four infusion tubes can be selected: For example, you can choose like outer diameter 5 mm and inside diameter 3 mm silica gel tube to deliver fluids or mass units by turning off K1 switch (down position is OFF) and turning on K2(up position is ON) switch. Other choices can be made as you required.

5. Fast flow: Press “Fast flow” key when the pump in stop status, the pump is running in fast flow status. Press “Fast flow” key when the pump in running status, the pump is running in fast infusion status.

6. Withdraw: Press the “Withdraw” when the pump in stop status. The pump is running in withdraw status.

Flow rate range: 10 to 2000ml/h

Infusion accuracy: ±10% if use recommended silica gel tube, ±30% if deliver in mass units

Required volume: 1 to 9999 ml

Power supply: 220+20 VAC,  50+1 Hz

Power consumption: 18VA

Operating temperature range: Ambient temperature: 10 to 40 °C, Relative humidity: 30% to 75%

Outline dimension: 100 mm×115 mm×140 mm

Weight: 2 kg

Safety classification: Class I, BF, general device.

For more types, please contact us for the catalog.